ARC Raiders · Cronus Zen Master

Rampage V5.1 – ARC Raiders Cronus Zen Script

Rampage V5.1 ARC Raiders Cronus Zen script

Cronus Zen Master is the name on Rampage V5.1 (ARC Raiders), and the public menu is a mix of gunfight controls and movement macros.

Rampage V5.1 (ARC Raiders) names Aim Assist, Anti Recoil, Auto Ping, Auto Slide, Crouch Shot, Dive Cancel, Ghost Tracker, Hair Triggers, Human Behavior, Jump Shot, Prone Shot, and Rapid Fire.

The source for Rampage V5.1 (ARC Raiders) also mentions 8 more controls that are not spelled out on this page.

CzenScripts shows Rampage V5.1 (ARC Raiders) at $29.99, which is the listing's figure as of 20 Nov 2026, and the page does not add a discount code.

Cronus Zen Master is the brand on the CzenScripts listing checked for Rampage V5.1 (ARC Raiders) on 20 Nov 2026, and the shop is only the source.

Rampage V5.1 (ARC Raiders) does not name PS5, Xbox, or PC, so this page does not guess a console.

Rampage V5.1 (ARC Raiders) does not state an update policy, a support channel, or a refund rule.

Rampage V5.1 (ARC Raiders) loads on PS5 with the controller in the Zen's A1 port, the console cable in the rear socket, and the PROG cable connected only while the slot is written.

Xbox Series does not use the PS5 bypass for Rampage V5.1 (ARC Raiders): the Zen sits between an Xbox pad and the console, and PROG comes out before you play.

On PC, Rampage V5.1 (ARC Raiders) uses the Zen's PC output rather than a console cable, and the device should not sit behind a USB hub.

The pad for Rampage V5.1 (ARC Raiders) is the one you already use in ARC Raiders: DualSense on PS5, an Xbox pad on Xbox Series, and either of those on PC.

Rampage V5.1 (ARC Raiders) does not name a third-party controller, so this page does not invent one.

Firmware and the memory slot are different jobs for Rampage V5.1 (ARC Raiders): the blue button on the top port is firmware, and Zen Studio is what writes Rampage V5.1 (ARC Raiders) into a slot.

A Zen has eight memory slots, and Rampage V5.1 (ARC Raiders) takes one of them until you overwrite that slot.

Zen Studio for Rampage V5.1 (ARC Raiders) is the browser app from Collective Minds, used in Chrome or Edge.

Unplug PROG only after the slot save finishes, or Rampage V5.1 (ARC Raiders) will not be on the device when you move it to ARC Raiders.

PS5 manual bypass is its own Cronus step and is separate from loading Rampage V5.1 (ARC Raiders), while Xbox Series never asks for that bypass.

If an update policy is stated for Rampage V5.1 (ARC Raiders), that wording is the whole promise, and a shop timestamp is not a patch note.

Support and a refund for Rampage V5.1 (ARC Raiders) count only when the source writes them down, and a missing line is not a hidden warranty.

Rampage V5.1 (ARC Raiders) does not change the ARC Raiders install on the console, because a Zen script only adds controller inputs the game already accepts.

The button layout inside ARC Raiders still has to match what Rampage V5.1 (ARC Raiders) expects, or the menu labels point at the wrong buttons.

The first session with Rampage V5.1 (ARC Raiders) belongs in a private match or a menu, where you can see which named control actually moved.

If one control on Rampage V5.1 (ARC Raiders) feels wrong, check the ARC Raiders button layout before you load a second copy of the file.

Loading Rampage V5.1 (ARC Raiders) is the ordinary Zen job, using Zen Studio and an empty slot, then unplugging the PROG cable before you play.

Rampage V5.1 (ARC Raiders) on ARC Raiders: 4.84 ★ from 50 reviews on CzenScripts (checked Nov 21 2026).

What do the named controls do?

The controls below are the ones Rampage V5.1 (ARC Raiders) actually names, and each note is what that name means in ARC Raiders.

Aim Assist

Rampage V5.1 (ARC Raiders) lists Aim Assist beside Anti Recoil, Auto Ping, Auto Slide.

For Rampage V5.1 (ARC Raiders), Aim Assist means Aim Assist adds right-stick movement while you aim or fire in ARC Raiders, on top of whatever the game already does near a target.

Rampage V5.1 (ARC Raiders) sends Aim Assist as right-stick movement while you aim or fire in ARC Raiders.

Rampage V5.1 (ARC Raiders) keeps Aim Assist off the Anti Recoil switch, so the two are not one mode with two labels.

Arc Raiders is a newer extraction shooter on these menus, and Aim Assist on Rampage V5.1 (ARC Raiders) is whatever stick or button the author named for it.

The public listing for Rampage V5.1 (ARC Raiders) does not print a stick value or a millisecond for Aim Assist, so the number you use is one you set after the file is loaded.

Auto Ping is also on Rampage V5.1 (ARC Raiders), and it is a different job from Aim Assist: Auto Ping presses the ping button during a fight in ARC Raiders.

Anti Recoil

Rampage V5.1 (ARC Raiders) lists Anti Recoil beside Aim Assist, Auto Ping, Auto Slide.

For Rampage V5.1 (ARC Raiders), Anti Recoil means Anti Recoil is a right-stick correction against muzzle climb while the trigger is held in ARC Raiders.

Rampage V5.1 (ARC Raiders) sends Anti Recoil as right-stick movement while you aim or fire in ARC Raiders.

Rampage V5.1 (ARC Raiders) keeps Anti Recoil off the Aim Assist switch, so the two are not one mode with two labels.

Arc Raiders is a newer extraction shooter on these menus, and Anti Recoil on Rampage V5.1 (ARC Raiders) is whatever stick or button the author named for it.

Nothing on the Rampage V5.1 (ARC Raiders) listing measures Anti Recoil, so the name is the claim and the feel is something you check yourself.

Auto Ping is also on Rampage V5.1 (ARC Raiders), and it is a different job from Anti Recoil: Auto Ping presses the ping button during a fight in ARC Raiders.

Auto Ping

Rampage V5.1 (ARC Raiders) lists Auto Ping beside Aim Assist, Anti Recoil, Auto Slide.

Read Auto Ping on Rampage V5.1 (ARC Raiders) as Auto Ping presses the ping button during a fight in ARC Raiders.

Rampage V5.1 (ARC Raiders) sends Auto Ping as controller input ARC Raiders already understands, switched from the Zen menu.

Turning Auto Ping off on Rampage V5.1 (ARC Raiders) should leave Aim Assist alone, because the author gave them separate names.

Arc Raiders is a newer extraction shooter on these menus, and Auto Ping on Rampage V5.1 (ARC Raiders) is whatever stick or button the author named for it.

The public listing for Rampage V5.1 (ARC Raiders) does not print a stick value or a millisecond for Auto Ping, so the number you use is one you set after the file is loaded.

Anti Recoil is also on Rampage V5.1 (ARC Raiders), and it is a different job from Auto Ping: Anti Recoil is a right-stick correction against muzzle climb while the trigger is held in ARC Raiders.

Auto Slide

On Rampage V5.1 (ARC Raiders), Auto Slide is not a rename of Aim Assist, and it sits with Aim Assist, Anti Recoil, Auto Ping.

Rampage V5.1 (ARC Raiders) treats Auto Slide as Auto Slide chains a slide with a cancel or a second input so ARC Raiders restarts the slide.

Rampage V5.1 (ARC Raiders) sends Auto Slide as movement buttons in ARC Raiders, timed to the action they are named for.

Rampage V5.1 (ARC Raiders) keeps Auto Slide off the Aim Assist switch, so the two are not one mode with two labels.

Arc Raiders is a newer extraction shooter on these menus, and Auto Slide on Rampage V5.1 (ARC Raiders) is whatever stick or button the author named for it.

The public listing for Rampage V5.1 (ARC Raiders) does not print a stick value or a millisecond for Auto Slide, so the number you use is one you set after the file is loaded.

Anti Recoil is also on Rampage V5.1 (ARC Raiders), and it is a different job from Auto Slide: Anti Recoil is a right-stick correction against muzzle climb while the trigger is held in ARC Raiders.

Crouch Shot

Crouch Shot is its own line on Rampage V5.1 (ARC Raiders), next to Aim Assist, Anti Recoil, Auto Ping.

Read Crouch Shot on Rampage V5.1 (ARC Raiders) as Crouch Shot repeats or holds crouch or lean in ARC Raiders, a stance macro rather than a new animation.

Rampage V5.1 (ARC Raiders) sends Crouch Shot as a hold, a tempo, or a release on the shot button while ARC Raiders plays the jumper.

Rampage V5.1 (ARC Raiders) keeps Crouch Shot off the Aim Assist switch, so the two are not one mode with two labels.

Arc Raiders is a newer extraction shooter on these menus, and Crouch Shot on Rampage V5.1 (ARC Raiders) is whatever stick or button the author named for it.

Rampage V5.1 (ARC Raiders) names Crouch Shot without a published strength, which means the tuning, if there is any, is on the Zen menu rather than in the catalog blurb.

Anti Recoil is also on Rampage V5.1 (ARC Raiders), and it is a different job from Crouch Shot: Anti Recoil is a right-stick correction against muzzle climb while the trigger is held in ARC Raiders.

Dive Cancel

On Rampage V5.1 (ARC Raiders), Dive Cancel is not a rename of Aim Assist, and it sits with Aim Assist, Anti Recoil, Auto Ping.

Rampage V5.1 (ARC Raiders) treats Dive Cancel as Dive Cancel is its own named switch on this ARC Raiders file, which means the author wanted it turned on separately from the other modes.

Rampage V5.1 (ARC Raiders) sends Dive Cancel as controller input ARC Raiders already understands, switched from the Zen menu.

Turning Dive Cancel off on Rampage V5.1 (ARC Raiders) should leave Aim Assist alone, because the author gave them separate names.

Arc Raiders is a newer extraction shooter on these menus, and Dive Cancel on Rampage V5.1 (ARC Raiders) is whatever stick or button the author named for it.

The public listing for Rampage V5.1 (ARC Raiders) does not print a stick value or a millisecond for Dive Cancel, so the number you use is one you set after the file is loaded.

Anti Recoil is also on Rampage V5.1 (ARC Raiders), and it is a different job from Dive Cancel: Anti Recoil is a right-stick correction against muzzle climb while the trigger is held in ARC Raiders.

Ghost Tracker

Ghost Tracker is its own line on Rampage V5.1 (ARC Raiders), next to Aim Assist, Anti Recoil, Auto Ping.

Read Ghost Tracker on Rampage V5.1 (ARC Raiders) as Ghost Tracker is its own named switch on this ARC Raiders file, which means the author wanted it turned on separately from the other modes.

Rampage V5.1 (ARC Raiders) sends Ghost Tracker as controller input ARC Raiders already understands, switched from the Zen menu.

Aim Assist stays a different control from Ghost Tracker on Rampage V5.1 (ARC Raiders), which is why both names are on the listing.

Arc Raiders is a newer extraction shooter on these menus, and Ghost Tracker on Rampage V5.1 (ARC Raiders) is whatever stick or button the author named for it.

Rampage V5.1 (ARC Raiders) names Ghost Tracker without a published strength, which means the tuning, if there is any, is on the Zen menu rather than in the catalog blurb.

Anti Recoil is also on Rampage V5.1 (ARC Raiders), and it is a different job from Ghost Tracker: Anti Recoil is a right-stick correction against muzzle climb while the trigger is held in ARC Raiders.

Hair Triggers

On Rampage V5.1 (ARC Raiders), Hair Triggers is not a rename of Aim Assist, and it sits with Aim Assist, Anti Recoil, Auto Ping.

For Rampage V5.1 (ARC Raiders), Hair Triggers means Hair Triggers shortens the trigger pull in ARC Raiders so the shot or the aim starts earlier in the travel.

Rampage V5.1 (ARC Raiders) sends Hair Triggers as repeated trigger presses in ARC Raiders.

Rampage V5.1 (ARC Raiders) keeps Hair Triggers off the Aim Assist switch, so the two are not one mode with two labels.

Arc Raiders is a newer extraction shooter on these menus, and Hair Triggers on Rampage V5.1 (ARC Raiders) is whatever stick or button the author named for it.

The public listing for Rampage V5.1 (ARC Raiders) does not print a stick value or a millisecond for Hair Triggers, so the number you use is one you set after the file is loaded.

Anti Recoil is also on Rampage V5.1 (ARC Raiders), and it is a different job from Hair Triggers: Anti Recoil is a right-stick correction against muzzle climb while the trigger is held in ARC Raiders.

Human Behavior

Human Behavior is its own line on Rampage V5.1 (ARC Raiders), next to Aim Assist, Anti Recoil, Auto Ping.

Rampage V5.1 (ARC Raiders) treats Human Behavior as Human Behavior is its own named switch on this ARC Raiders file, which means the author wanted it turned on separately from the other modes.

Rampage V5.1 (ARC Raiders) sends Human Behavior as controller input ARC Raiders already understands, switched from the Zen menu.

Rampage V5.1 (ARC Raiders) keeps Human Behavior off the Aim Assist switch, so the two are not one mode with two labels.

Arc Raiders is a newer extraction shooter on these menus, and Human Behavior on Rampage V5.1 (ARC Raiders) is whatever stick or button the author named for it.

Rampage V5.1 (ARC Raiders) names Human Behavior without a published strength, which means the tuning, if there is any, is on the Zen menu rather than in the catalog blurb.

Anti Recoil is also on Rampage V5.1 (ARC Raiders), and it is a different job from Human Behavior: Anti Recoil is a right-stick correction against muzzle climb while the trigger is held in ARC Raiders.

Jump Shot

Jump Shot is its own line on Rampage V5.1 (ARC Raiders), next to Aim Assist, Anti Recoil, Auto Ping.

Read Jump Shot on Rampage V5.1 (ARC Raiders) as Jump Shot is its own named switch on this ARC Raiders file, which means the author wanted it turned on separately from the other modes.

Rampage V5.1 (ARC Raiders) sends Jump Shot as a hold, a tempo, or a release on the shot button while ARC Raiders plays the jumper.

Aim Assist stays a different control from Jump Shot on Rampage V5.1 (ARC Raiders), which is why both names are on the listing.

Arc Raiders is a newer extraction shooter on these menus, and Jump Shot on Rampage V5.1 (ARC Raiders) is whatever stick or button the author named for it.

Rampage V5.1 (ARC Raiders) names Jump Shot without a published strength, which means the tuning, if there is any, is on the Zen menu rather than in the catalog blurb.

Anti Recoil is also on Rampage V5.1 (ARC Raiders), and it is a different job from Jump Shot: Anti Recoil is a right-stick correction against muzzle climb while the trigger is held in ARC Raiders.

Prone Shot

Rampage V5.1 (ARC Raiders) lists Prone Shot beside Aim Assist, Anti Recoil, Auto Ping.

For Rampage V5.1 (ARC Raiders), Prone Shot means Prone Shot repeats or holds crouch or lean in ARC Raiders, a stance macro rather than a new animation.

Rampage V5.1 (ARC Raiders) sends Prone Shot as a hold, a tempo, or a release on the shot button while ARC Raiders plays the jumper.

Aim Assist stays a different control from Prone Shot on Rampage V5.1 (ARC Raiders), which is why both names are on the listing.

Arc Raiders is a newer extraction shooter on these menus, and Prone Shot on Rampage V5.1 (ARC Raiders) is whatever stick or button the author named for it.

Nothing on the Rampage V5.1 (ARC Raiders) listing measures Prone Shot, so the name is the claim and the feel is something you check yourself.

Anti Recoil is also on Rampage V5.1 (ARC Raiders), and it is a different job from Prone Shot: Anti Recoil is a right-stick correction against muzzle climb while the trigger is held in ARC Raiders.

Rapid Fire

On Rampage V5.1 (ARC Raiders), Rapid Fire is not a rename of Aim Assist, and it sits with Aim Assist, Anti Recoil, Auto Ping.

Read Rapid Fire on Rampage V5.1 (ARC Raiders) as Rapid Fire repeats or groups the trigger in ARC Raiders, and the weapon's own fire cap still applies.

Rampage V5.1 (ARC Raiders) sends Rapid Fire as repeated trigger presses in ARC Raiders.

Rampage V5.1 (ARC Raiders) keeps Rapid Fire off the Aim Assist switch, so the two are not one mode with two labels.

Arc Raiders is a newer extraction shooter on these menus, and Rapid Fire on Rampage V5.1 (ARC Raiders) is whatever stick or button the author named for it.

Rampage V5.1 (ARC Raiders) names Rapid Fire without a published strength, which means the tuning, if there is any, is on the Zen menu rather than in the catalog blurb.

Anti Recoil is also on Rampage V5.1 (ARC Raiders), and it is a different job from Rapid Fire: Anti Recoil is a right-stick correction against muzzle climb while the trigger is held in ARC Raiders.

Which other scripts does Cronus Zen Master list?

Rampage V5.1 (ARC Raiders) is a different file from Rampage V4.2 for ARC Raiders, whose menu names Anti Recoil, Auto Ping, Auto Slide, and Crouch Shot. Rampage V4.2 page

Rampage V5.1 (ARC Raiders) is a different file from Rampage V4 for ARC Raiders, whose menu names Anti Recoil, Auto Ping, Auto Slide, and Crouch Shot. Rampage V4 page

Rampage V5.1 (ARC Raiders) is a different file from Rampage V5 for ARC Raiders, whose menu names Anti Recoil, Auto Ping, Auto Slide, and Crouch Shot. Rampage V5 page

Rampage V5.1 (ARC Raiders) is a different file from Rampage V4.1 for ARC Raiders, whose menu names Anti Recoil, Auto Ping, Auto Slide, and Crouch Shot. Rampage V4.1 page

How to flash a .gpc · PS5 · Xbox · PC

Questions

Who makes Rampage V5.1 (ARC Raiders)?

Cronus Zen Master makes Rampage V5.1 (ARC Raiders), and the CzenScripts page is only the listing that was read.

What game is Rampage V5.1 (ARC Raiders) filed under?

Rampage V5.1 (ARC Raiders) is filed under ARC Raiders, and the menu is a mix of gunfight controls and movement macros.

What price does the listing show for Rampage V5.1 (ARC Raiders)?

Rampage V5.1 listing on CzenScripts shows Rampage V5.1 (ARC Raiders) at $29.99, checked 20 Nov 2026.

How do you load Rampage V5.1 (ARC Raiders) on PS5, Xbox, and PC?

Load Rampage V5.1 (ARC Raiders) from Zen Studio into a memory slot, unplug PROG, and use a DualSense on PS5, an Xbox pad on Xbox Series, or either pad on PC.